In recent years, with the rapid development of national economy, the expansion of the market capacity, special cables and thus ushered in a good development opportunity: oil rigs annual demand of over 1.5 million km, high-speed rail demand more than 3.73 million km. Such as railway signal cables, marine cables, automotive wire, mining cables, aircraft cables and other special cables, design Automatic stripping machine, but also to the thousands of meters per year. Some experts estimate the market within the next five years, an amount or special cables will reach 40 billion yuan / year - 50 billion yuan / year, the market will account for the domestic cable market, about 10% of total sales. Stripping machine Stripping knot how to solve? Its operation should pay attention to what matters? 1. cutting wire strippers, cable cutting it and what is the difference between the machine? A: The cable cutting machines, it belongs to stripping machine, which can be divided into two automatic and non-automatic. The cutting wire stripping machine, it is a kind of stripping machine, so these are two different branches. 2. kinks when stripping wire strippers, what are the reasons ah? A: kink when stripping wire strippers, cable is not likely to be put away, then just add an automatic pay-off may solve the problem. 3. strippers, its handling precautions are there? A: Handling Precautions stripping machine are: (1) before use to carry out the necessary checks, automatic coaxial cable strippers, whether its operating system is the line, the switch button is sensitive and reliable, and the blade is intact and so on. (2) the appropriate stripping parameters to be set up, so as not to affect the stripping effect. (3) If you want to change the parameters, strippers, then power off your device, and then to. Stripping Machine recycling waste cable Notes discarded cables before starting the separation and recovery of the surface and the inner core, the streets of the cable should be cut to ensure the long-term durability of the blade, then start feeding the cable through the blade surface on the machine will be skin incision, and then will have been cut by the conveyor belt used cables to the drum at the semi-automatic waste wire strippers, strong pressing force by the drum, the inner core and the surface began to separate, and then began to speak from the surface layer and the inner core Category tied, this is the complete works of scrap cable stripping machine. Recycling process Notes 1. Note that the blade should not be too sharp, to avoid harming the inner core, while paying attention to setting position of the blade depending on the cable. Note that if placed in the wrong position 2. Check the feed. 3. Note that both sides of the spring pressure is too tight, too tight will cause the cable can not pass. Semiautomatic scrap wire stripping machine _DAUMAK (certified) _ stripping machine provided by the Dongguan City Code ching Machinery Co. Zhen Machinery Co., Ltd., Dongguan City Code (www.daumak.com) is a leader in Dongguan, electronics, electrical products manufacturing equipment, over the years, the company implement the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs . In a typical frame machinery leadership with the staff warmly welcome all inquiries negotiations to create the typical mechanical frame a better future.