Challenges and opportunities facing the peeling machine (1) In terms of size, skinning machine industry to achieve a steady and rapid development. By the end of November 2011, a thick line stripping machine, peeling machine industry output value of 4,934 billion yuan, 45 billion yuan is expected to complete five by the end of December, an increase of 40.5% (2006 peeling machine industry output value of 1656 billion yuan, 'Eleventh Five 'During the Chinese peeling machine output increased about three times); sales of 4762 billion estimated annual 5300 billion yuan, sales rate of 97.4%; profit of 31.05 billion yuan by the end of November, about profit margin of 6.5%, is the history the highest annual (previously has remained at around 5%). (2) technological innovation, product structure adjustment has made significant progress. 2010 1 ~ 11 months, peeling machine production 680,000 units, an increase of 32%, strippers, including CNC machine tool 200,000 sets, an increase of 68%, production, CNC rate are improving, indicating that technological innovation, structural adjustment led product structure optimization. (3) The adjustment of industrial structure has great progress. CNC system, features a weak link, sub-line strippers, along with preferential policies, has been significantly improved over the past few years, the scale up, sales revenue and value are significantly improved, and achieve synchronization with the host growth . Coaxial structure, followed from outside to inside the sheath, 4 portions of the outer conductor (shield), dielectric and the inner conductor. Jacket, which is the outermost layer of insulation, protective, outdoor cable with excellent climate characteristics appropriate to a black polyethylene, indoor subscriber cable from aesthetic considerations are advised to use light-colored polyethylene. An outer conductor (shield), the outer conductor of the coaxial cable has a dual role, both as a wire transmission circuit, low transmission, wire strippers, but also has shielding effect, there are usually three kinds of outer conductor structure. (1) metal tube. This structure is made of copper or aluminum longitudinally welded or seamless extruded copper tube drawing from this structure shielding performance the best, but poor flexibility, commonly used in the trunk coaxial cable. (2) aluminum plastic composite tape longitudinally overlapped. This structure has a good shielding effect, and low manufacturing cost, but because the outer conductor is a tube with a longitudinal seam waves that can wear clothing from the gap at the leak, should be used cautiously. (3) braid and aluminum composite vertical package combinations. This is from a single braid structure evolved, it has good flexibility, light weight and reliable joints and other characteristics, experiments show that the use of reasonable composite structure, shielding performance is greatly improved, the current form of this structure is heavy use. Strippers, typical frame machinery, sub-line stripping machine provided by the City Code ching Machinery Co. Strippers, typical frame machinery, sub-line stripping machine Dongguan City Code Zhen Machinery Co., Ltd. (www.daumak.com) this year introduced a new upgrade, the above picture is for reference only, please call the contact or pictures on this page phone, for the latest information, contact: S. Huang