TK-9800 is a micro coaxial cable stripping machine for the manufacture of the communications industry (coaxial cable processing) and design, this machine uses rotary cutter rotary cutter, V-blade cutting peeling, twice in the head and co-ordination of crude coaxial wire strippers, more accurate, more rapid improvement of the processing quality and yield of the product, and no need to replace any blade to complete the entire range of cable types and diameters of processing, all processing of data can be stored in Setting files, easy to use, easy to operate. Model: TK9800 Display: touchscreen applicable Wire: micro coaxial cable Display Interface: 7-inch touch screen, Chinese LCD outer diameter: 0.80-4.0mm Power: 220 / 110V 50 / 60hz peeling accuracy: ± 0.1mm wire cutting accuracy: ± 0.1mm Cutting length: 25mm-9999mm Weight: 100kg stripping length: left MAX40mm automatic coaxial stripping machine, the right is not limited to the maximum air pressure 0.4 ~ 0.6Mpa peeling layers: 8 layers (according to customer needs) Drive: Motor \ ball screw drive storage capacity: 60 kinds of cable processing data Working environment: 0-45 degrees, dry, vibration-free work surface Dimensions: 800 * 700 * 440mm Productivity: 850--1150pcs / h rotary blade 2, imports of tungsten steel material; cutting and stripping blades 2, Swedish high-speed steel semiautomatic Use of a coaxial wire strippers Objective: To establish the proper equipment to prevent accidents, ensure the normal operation of equipment, improve work efficiency. 21 state flags on each piece of equipment marked with the device name, device ID, device initially enable time, equipment sectors. 2.2 Before work, check whether the power supply is plugged 2.3 Check the work area clean place. To clean the work site coaxial stripping machine, you must turn off the power, to avoid accidents. 2.4 Check whether the machine joints are loose, if found, contact the equipment technician checks. 3 Work Note: When the machine is turned on 3.1, if found, does not sound normal, the need for timely notification equipment technician for inspection. 3.2 Staff can not arbitrarily move, a good argument demolition equipment, testing equipment, adjust equipment settings, if necessary, should contact equipment technician. Note that the line is placed in the middle of the jaws 3.3 operation, to prevent cramping. 3.4 If new models require rotating wire stripping, first by equipment technicians need to adjust the parameters for the device, adjusted only by the best staff to operate. 4. equipment maintenance: routine maintenance and regular maintenance 4.1 device is to maintain the normal operation of the device on the basis of thin coaxial wire strippers, positive measures to prevent accidents, the level of maintenance by the staff before the equipment used or carried out after the secondary responsibility of the equipment maintenance technician. By inspection of the equipment, cleaning and wipe the device in the neat, clean, safe, well-oiled state. To use a mild detergent to clean equipment at 4.2, the absolute prohibition of the use of irritant or corrosive cleaning agents. Automatic coaxial coaxial wire strippers stripping machine _ _ Code Jeong machinery supplied by Machinery Co., Ltd., Dongguan City Code ching. Machinery Co., Ltd., Dongguan City Code ching (www.daumak.com) strong, credible, in Dongguan, Guangdong electronics, electrical products manufacturing equipment industry has accumulated a large number of loyal customers. The company better work attitude and continuous improvement Code innovative ideas will lead frame into the brilliant machinery and you work for a better future!